|
Sun Graphics
Pompano Beach, Florida
Remove and Replace Burner Orifice Ring. Burner Orifice Ring was
cracked in three places on the front Face and four places around
the outside.
Burner Orifice Ring |
|
| Before |
After |
|
|
|
Remove, repair and replace the burner spool piece in a York-Shipley
Boiler.
Burner Orifice Ring |
|
| Before |
After |
|
|
|
Building the Spool Piece
1. Assemble new outer and inner rings to burner plate.
2. Install 2" Insulating Board to back plate.
3. Weld Stainless Steel stays to back plate and outer ring to
hold in the refractory.
4. Install Air-Bond refractory.
5. Burner Spool Piece ready to be installed into boiler.
6. Burner Spool Piece installed into boiler and sealed to Morrison
Tube tile from the inside of the boiler with Air-Bond Refractory.
|
)
)
)
)
)
)
)
)
)
)
)
)